A door nameplate has three requirements. It must stay accurate through an occupant’s moves, withstand...
Read More
A door nameplate has three requirements. It must stay accurate through an occupant’s moves, withstand years of keying, rings, cleaning fluids, and shoulders, and be easy to read from the far end of a corridor.
Miss any one of these requirements, and you pay for your oversight in some fashion. Whether it takes the form of a reorder, a complaint about the wrong name appearing on a door, or a visitor knocking on the wrong door, the cost is visible.
Every decision in this guide reflects those requirements. Material, lettering method, size, contrast, mounting, and the insert system follow those requirements in roughly the order they might be resolved. This guide covers office door nameplates and custom door nameplates for Canadian buildings, from first door schedules to the reorder placed three years later.
Get A Quote On Door Nameplates
A door nameplate indicates a room or occupant. It is the smallest part of a building signage system: the lobby directory is the largest, and floor and corridor directional signs fall in the middle.
The visitor will read and use the different signs in that order. They will first refer to the directory and follow the arrows to the east wing. There, they will have to read the door designations to know whether they have reached the right room. All the signs must be consistent; if the directory lists Suite 3.14 while the door indicates 314, the visitor will have to go back to the reception.
Consistency matters more than good looks. Decide on a format for room designations, name, and font, and stick to it across all signs in the building.
Purchase orders often combine three types of signs. Separate them before requesting a quote.
Door nameplates identify a person (sometimes including a title). Often replaced when an employee moves.
Room identification signs name a permanent space such as a washroom, stairwell, Boardroom B, or Room 214. They often follow accessibility regulations for tactile text, braille, and mounting positions in many Canadian public and institutional buildings.
Directional signs guide the viewer somewhere (with arrows), show the floor or range of floors, and/or identify departments. They are mounted in main corridors and lobbies, but not on doors.
This difference affects the price. A directional sign using permanent room numbers mounted on a door should use tactile characters for the permanent number and a removable insert for any transient name or employee title.
If you specify a tactile combined (name + number) sign without noting that the name is to be removed later, you are paying for braille that the employee will take with them on their next move.
Write the content before you choose a size, because the content drives every later decision.
Set one naming rule for the whole building. Decide whether plates show the first name and surname or an initial and surname, and whether to include professional designations such as P.Eng. or CPA.
Titles cause most of the trouble. “Senior Manager, Regulatory Affairs and Quality Systems” runs past 50 characters. It will not fit a 2-by-8-inch plate at a readable size. Set a character limit for titles at the policy level, so nobody has to negotiate their own plate.
Door numbers must match those on the floor plans, fire safety plan, and directory. Select a single format, for example 3014 or 3.014, and use it consistently throughout the building.
Room designations such as Server Room, Wellness Room, or Records should be on permanent signs, not changeable inserts that will inevitably be replaced.
A logo on every door doesn’t look good on a floor with ten offices, but it can look cluttered on a floor with two hundred. Corporate specs tend to do one of two things. They put a small logo mark at the very left edge of each plate, or they leave the door plates plain and save the logo for the reception.
The logo also dictates the production. A multicolor logo usually calls for screen printing or digital printing, while a single-color mark works well with engraving, etching, or anodizing.
The rules depend on who you are and where you operate:
Two languages roughly double the text. “Salle de conférence / Conference Room” will not fit on one line of a 2 by 8 plate at the character height you would use for English alone. Plan for a taller plate, two lines, or both.
This choice has the biggest long-term cost impact of anything in the specification. Most buyers make it by default.
Engraved door nameplates suit text nobody expects to change. Good examples include a room number, a named donor room, a founding partner’s office, or a department that’s had the same suite for a decade.
Engraving on brass, stainless steel, or lamicoid holds up to years of handling. The plate also looks permanent, because the text is permanent.
Interchangeable door nameplates split the sign into two parts. A holder, usually aluminum, fixes to the door or wall and stays in place. A slim insert carrying the name slides in from the side or sits behind a clear window.
Here is how the cost plays out. Say your office has 80 named doors, and 15 people change rooms or leave each year.
Here are nine practical steps to reduce door nameplate reorders. Build on this, from counting turnover to batching insert orders.
The holder retains its place, fixtures, and finish so the door isn’t riddled with new holes.
The insert must match the originals in material, thickness, font, cap height, color, and text placement. Maintain a single-page specification sheet that includes all of these, and send it with every order. Without the sheet, inserts tend to vary slightly from order to order. After the fourth order, the fourth floor appears to be from a different company.
Material decides weight, finish, lettering options, and lifespan. Identifab’s material range covers aluminum, stainless steel, brass, lamicoid, Lexan polycarbonate, vinyl, foil, and Mylar. Four of these handle most door plate work. For a closer look at each option, see the metals to consider for custom nameplates.
Aluminum is lightweight, holds a clean-cut edge, and is compatible with almost any production method. Identifab supplies aluminum in .010 inch (30 gauge) to .125 inch (8 gauge). Door plates are thicker to stay flat and rigid.
Anodizing seals color and print into the aluminum surface’s pores. The anodized surface provides weather resistance, making it ideal for exterior entrances.
Stainless steel is the perfect choice for doors exposed to frequent cleaning, high temperatures, and harsh chemicals. Chemical etching leaves an indelible image on the plate, so etched stainless steel is ideal for these conditions.
We have a wide range of stainless steel in stock from .018” (26 gauge) to .060” (16 gauge) in 2B or #4 finish. The #4 brushed finish resists fingerprints much better than a mirror finish, which matters for a door opened hundreds of times a day in a high-traffic washroom.
Brass has a warm, traditional appearance found in law firms, historic buildings, and executive offices. Identifab frequently uses this metal for plaques, etching them and filling the recessed areas with paint to create strong contrast. Brass plates range from .020 to .060 inches thick.
The downside is that brass tends to tarnish, so ask about a clear coat to preserve its natural luster, or consider the aged look of a patina. Weighing the two metals? See when to choose brass over stainless steel for cost, upkeep, and appearance.
Laminated acrylic, also known as lamicoid, comes in 2- or 3-ply sheets, either .060 or .125 inch thick. Engraving penetrates the thinnest top layer, revealing a contrasting core. On a black plate with a white core, white text appears wherever a laser removes the black top layer. This material is compatible with wall holders, adhesive backing, and hook-and-loop fasteners, and is generally cheaper than metal.
Destructible acrylic is a variant material designed to shatter when someone tries to peel it away from a surface, making it useful as a tamper-evident security label or for marking sensitive assets such as equipment.
Destructible acrylic would make a poor choice for a door nameplate in most office environments, since the first reorganization would destroy it. It would suit plates intended to remain in place until removed as evidence of tampering, such as the door to a secure records room.
Finish affects how a plate reads as much as how it looks. Brushed and satin finishes scatter light and cut glare. Polished finishes bounce overhead light straight back at the reader. Under a pot light, a polished brass plate turns into a mirror at certain angles.
For color, give your supplier a PMS reference, not a screenshot or a brochure. Screens and office printers both shift color.
Ask for a physical proof on the actual plate material before the full run. The same corporate blue looks noticeably different on brushed aluminum than on white lamicoid. You want to see that difference before you approve 60 plates.
Identifab offers five lettering methods: laser engraving, chemical etching, screen printing, digital printing, and anodizing. Each one suits a different balance of quantity, color, and durability.
A laser removes material to create the text. On lamicoid, the laser reveals the core color. On metal, it marks or cuts into the surface. Identifab also offers rotary engraving, which uses a cutting tool to cut the letters.
Engraving suits low-volume orders, individual names, and single replacement plates.
Chemicals cut the design into the metal, then paint fills the recess. The text sits below the surface, so fingers and cleaning cloths wear the surrounding metal before they reach the lettering. Choose etched stainless steel or etched brass for plates you expect to keep for the life of the building.
Screen printing pushes ink through a mesh stencil onto the plate. Identifab screen prints with baked enamel paint, and the method handles multicolor logos well.
Each color needs its own screen, so setup costs spread more easily across 100 identical plates than across 3.
Digital printing is screenless and designed for print-on-demand. Variable data printing lets you print different names on plates in one run without extra mounting. Digital printing also lets you reproduce multi-color logos, photos, and gradients.
Anodizing creates an image through electrolysis that saturates the aluminum plate’s surface with oxide. The resulting finish resists environmental factors and mechanical damage, making anodized plates suitable for doors, parking barriers, and other street-facing structures.
Size the plate in this order: content first, reading distance second, the door itself last.
Many offices use the 2-inch by 8-inch format because it fits one name line and one title line, and it matches common holder systems. Treat it as a starting point, not a rule. A narrow glass sidelight might only allow 3 inches of width. A boardroom with double doors might suit a plate 3 inches by 12.
Leave clear margins around the text. A practical rule is to make the margins at least as wide as your capital letters. Text running to the edge looks crowded and reads more slowly.
Before you approve a size, print the layout at full scale and tape it to each door type in the building. Ten minutes of testing catches problems a PDF proof never shows.
Choose a sans serif typeface with open letterforms. Distinguish similar characters like capital I, lowercase l, and the number 1. Avoid using condensed or decorative type styles; these save space but sacrifice legibility.
The distance to read a sign determines character height. CSA/ASC B651 defines relationships between viewing distance and visual character height by using a table.
Signs in corridors, for example, are read at a greater distance (6 meters) than a door plate (1 meter). This means the corridor sign must be taller.
Test your door plate at two distances:
Use mixed case for names. Readers recognize “John Parker” faster than “JOHN PARKER” because the word shape is more distinctive. Tactile text follows its own rules, covered in the accessibility section below.
Contrast decides whether a plate reads under real corridor lighting. CSA B651 measures luminance contrast between text and background, and the 2018 edition sets a minimum of 70 percent for tactile signs.
The calculation uses the light reflectance value (LRV) of each color:
For example, white text with an LRV near 85 on a charcoal plate near 10 gives (85 minus 10) divided by 85, or about 88 percent. Brushed aluminum text on clear acrylic over a grey wall often falls far below 70.
Glare works against contrast. A matte surface keeps numbers readable under fluorescent tubes. A gloss surface washes the text out at head height.
Check what the plate goes onto before you finalize the design. The surface determines the fixing, and the fixing determines the plate’s weight, thickness, and hole pattern.
For fixing options on every surface, plus a site survey checklist, understand door nameplate mounting by door surface.
Nameplates for glass doors usually mount in one of three ways: with standoffs, with double-sided adhesive, or in glass-specific slider systems.
Standoffs hold up the plate slightly from the glass on a barrel fixing. This requires drilling holes through the glass (only a glazier should do this), as tempered glass cannot be drilled after manufacture and will shatter.
Adhesive mounting avoids drilling entirely.
Glass also shows both faces. A plate on a glass partition shows its back to whoever stands on the other side. If both sides face people, specify a two-sided plate or a matching backer.
Solid wood or solid core doors are good at holding screws, so make sure to drill pilot holes to stop the veneer splitting and use brass or stainless screws to match the plate.
On painted or veneered doors, high-bond adhesive tape avoids holes and suits leased space. Clean the surface with isopropyl alcohol first. Apply above 10°C, since most pressure-sensitive adhesives bond poorly to cold surfaces.
Hollow metal doors and steel frames accept magnetic mounting, which lets facilities staff move a plate without tools. Adhesive bonds well to powder-coated finishes after cleaning.
Before anyone drills a fire-rated door, check the label on the door edge and ask your door hardware supplier. Changes outside the manufacturer’s listing put the door’s rating at risk.
Mount the plate on the wall next to the latch side so it stays visible when the door is open. It also meets accessibility standards for tactile signs.
Use anchors rated for the plate’s weight, or adhesive for lightweight plates in drywall. Mount all plates on the same vertical plane and at the same distance from the door frame on every floor. On a floor with 40 doors, a laser level and a cardboard template with hole positions will save you an afternoon.
Exterior door plates across much of Canada face freeze-thaw cycles, road salt, and UV exposure. Temperatures swing from well below -20°C in winter to above 30°C in summer.
Your options for exterior plates:
Indoor plates have it easier, with one exception. Doors near pools, commercial kitchens, or labs face humidity and chemical fumes, so treat them like exterior doors.
Service life depends on where the lettering is placed. Etched and anodized text is embedded in or beneath the surface and resists abrasion. Surface-printed text is subject to the first wear from hand contact.
Clinic and laboratory doors are often wiped with disinfectant several times daily. For such doors, choose etched stainless steel or second-surface printed Lexan. For second-surface Lexan, the printed area is hidden beneath a clear polycarbonate layer (.005, .010, or .020 thick) that never contacts cleaning chemicals.
Before ordering, ask the custodians what cleaning solution they use. Check their solutions against the plate material before ordering. Cleaning requires only a soft cloth and mild detergent. Avoid scouring pads on any plate material.
A full rollout succeeds or fails on the door schedule. Build a spreadsheet with one row per door and these columns:
Take a hypothetical three-floor clinic with 60 doors. The schedule might break down into 22 permanent room signs needing tactile text, 30 practitioner nameplates in holders, and 8 exterior or corridor signs. Each group needs its own material, method, and lead time. Forcing all 60 into one specification produces 60 compromises.
Walk every floor with the schedule before you approve anything. You will find the glass sidelight nobody drew, the door with a kick plate right where the sign should go, and the room someone renamed last month.
Install in this order: permanent room signs first, then holders, then name inserts once the moves settle.
Organizations with offices in Toronto, Calgary, and Halifax often find that the Calgary plates came from a different supplier, in a slightly different font, at a slightly different height.
A written signage standard prevents this. It should cover:
Store one master production file and send it to every site. Sourcing door nameplates Canada-wide from one manufacturer removes another source of drift. Identifab ships door plates to businesses across Canada from its Etobicoke facility.
When older plates have no artwork on file, matching door plates to existing signage starts with a photo and a ruler.
Supply vector artwork in AI, EPS, or SVG format, or as a PDF with fonts converted to outlines. A JPG logo pulled from your website will blur when you scale it to plate size.
Send names and titles as editable text in a spreadsheet, not typed into an email body, so nobody retypes 60 names. Name the font and weight, or send the font files if your license allows.
Proofread the list twice. A misspelled surname costs a full remake.
If you have no print-ready files, Identifab offers a design service to prepare artwork for production.
Order size changes which production method makes sense:
Identifab takes orders from a handful of plates to a thousand or more.
Lead time depends on method, quantity, and how fast you approve proofs. Contact Identifab for a turnaround estimate on your order. Build proof approval into your move date, because production starts only after you sign off.
For reorders, batch inserts quarterly rather than ordering them one at a time. Keep five to ten spare blank inserts on site for urgent new hires.
Corporate floors require consistency and high turnover. Interchangeable door nameplates with brushed aluminum holders and either engraved or digitally printed inserts are the norm, covering most offices. Boardrooms and executive suites tend to use more engraving in brass and/or stainless steel to signify their door nameplates.
Healthcare doors face constant disinfection and frequent practitioner changes. Etched stainless steel or second-surface Lexan withstands frequent cleaning. Permanent signs for exam rooms and washrooms fall under accessibility requirements.
Schools need durable room numbers and plates able to survive hallways full of students. French language and immersion schools also need bilingual text. Fixed engraved room numbers paired with changeable teacher inserts suit most classrooms.
Plant offices sit near forklifts, oil and dust, and etched stainless steel resists the chemicals involved. Identifab brings the approach it uses for industrial nameplates and asset tags to office signage on the same sites.
John Purnell founded Identifab in 1969 and began fabricating nameplates in an industrial unit north of Toronto. Today, the company operates from an 18,500 sq. ft. facility at 43 Baywood Road in Etobicoke.
Identifab offers engraving, etching, screen printing, digital printing, and anodizing, along with metal fabrication and design services. One supplier handles your custom door nameplates from the first artwork file to the finished plate.
Client relationships run long. Trench Ltd. has worked with Identifab since 1970. Aecon Group Inc. describes a relationship of close to 10 years in testimonials published on the Identifab site.
Specify door nameplates in this order: content, fixed or changeable, material, method, size, contrast, then mounting. Keep permanent room signs separate from changeable nameplates. Write every choice into one signage standard and send the same file to every site.
Start with your door schedule. Count the doors, flag which ones change occupants, and note every glass panel, fire door, and leased surface.
Then send the spreadsheet and your artwork to info@identifab.com, or Call (416) 743-7343, Monday to Friday, 7 am to 4 pm. Identifab’s team will work through the specification with you before any plate goes into production.
Price depends on material, size, lettering method, and quantity. Send your door schedule to Identifab for a quote based on your building.
Usually, yes. Send the holder’s inner dimensions and insert thickness, or a sample insert, so the new inserts match your installed holders.
Etching uses chemicals to recess the design into metal. Engraving uses a laser or rotary tool. Both place text below the surface, so the lettering lasts.
Anodized aluminum and etched stainless steel both work well for exterior doors. Anodized aluminum resists weather. Stainless steel handles salt and chemical exposure.
Use high-bond double-sided adhesive or a slider system designed for glass. Clean the glass with isopropyl alcohol and apply above 10°C.
A door nameplate has three requirements. It must stay accurate through an occupant’s moves, withstand...
Read More
How Do You Choose Metal Nameplates and Tags That Last Match the material to the...
Read More
When a label fails in an industrial environment, the consequences extend well beyond re-tagging equipment....
Read MoreContact us to explore how we can help your business grow.
We have been doing business with Identifab Industries Limited for close to 10 years and will continue to work with Identifab for many years to come. The quality of work and service has impressed me on a multitude of levels.They are efficient and are always able to deliver a quality product in a timely manner, not to mention the friendliness, professionalism, great customer service and family oriented atmosphere.
Thank you Identifab family for your superior service over the years.
As a longtime supporter of Trench Ltd (since 1970), we have found Identifab to be a very valuable supplier. We have had continued success with this relationship over the years due to their quality of product, customer service, on time delivery and especially their ability to regroup during our unusual trending of ups and downs in Production requirements. They pull out all the stops to make these trends flow as smoothly as possible. I would recommend this supplier without hesitation.
Get In Touch with Identifab for Custom Labels & Name Plates

